Porting & Polishing Gen III Blower

Subject: Re: Porting & Polishing Gen III Blower Fri Nov 06, 2009 8:50 pm

Karma has a wife that can run a lathe?

_________________
95 riviera wht s/c...mods are in the works...mildly ported heads,manifolds and intake manifold. bilstein rear conversion. CCS custom springs.lowered 1". 160 stat.and a whole bunch of other s..t that i have to get out of my brain and onto the car.

Subject: Re: Porting & Polishing Gen III Blower Sat Nov 07, 2009 1:21 pm

All done with the porting. I plan on buying some new short bolts, but for now they will stay blocking 1mm of air in the blower.
here are some final shots:

I went with a gloss black, and plan on doing the snout some other time too. didnt come out perfect, but for the time i put into the prep and paint it came out pretty well. next time i'd strip it and prime it for better coverage.

_________________
3.4, N*, 1.84RR, P&P blower and LIM, 3"DP, 4"WAI, plog, 6K HID, Eibach pro springs, KYB GR-2, Fbody 12" brakes,caddy STB & sway bar. Rear addco sway bar is next twisted

Subject: Re: Porting & Polishing Gen III Blower Sat Nov 07, 2009 1:33 pm

I think you did pretty well for a home port job. Good work.

_________________
Jason
1998 Buick Riviera: 4" FWI, 3.4" pulley, VS cam, "SLP" headers, 3" exhaust, ported s/c, Addco swaybars, STB
1987 Regal Turbo T

Subject: Re: Porting & Polishing Gen III Blower Sat Nov 07, 2009 1:56 pm

thanks! the blower seems to feel cooler to the touch with the car at operating temp. I dont notice a difference in sound, but the car seems to pull easier, especially for 80* weather.

_________________
3.4, N*, 1.84RR, P&P blower and LIM, 3"DP, 4"WAI, plog, 6K HID, Eibach pro springs, KYB GR-2, Fbody 12" brakes,caddy STB & sway bar. Rear addco sway bar is next twisted