Riv Performance
Would you like to react to this message? Create an account in a few clicks or log in to continue.

The 8th Gen Riviera Resource
 
HomeDashboardLatest imagesSearchRiviera Questions & AnswersWrite-Ups IndexRegisterRelated LinksLog in

 

 Write-Up: L32 (Series III SC) Install/swap, the saga continues

Go down 
+19
albertj
bigdave
L67
sburch23
Bowersk
RhinoFLA
99Rivman
TType_Riviera
oldsman105
BigTexKahuna
98riv
Jason
deekster_caddy
pwmin
Mr.Riviera
nothincame2mind
AA
T Riley
urbsnspices
23 posters
Go to page : 1, 2, 3, 4  Next
AuthorMessage
urbsnspices
Fanatic
urbsnspices


Location : CHICAGO, US of MFn America
Joined : 2007-02-08
Post Count : 336
Merit : 4

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyThu Feb 08, 2007 11:39 pm

Well here is the operating table:
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010175sj8.th

And the patient:
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010173lq6.th

Notice the date and time code when some robot put this 6!t©️h together. Smells so new and clean, kinda like tide detergent. Odd.. suspect
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010179jf9.th

Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010180xf3.th

Outlet of Gen5 M90
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010176xm2.th

These will never be this clean again:
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010178ft3.th
Back to top Go down
T Riley
Guru
T Riley


Name : Travis
Age : 33
Location : Minnesconsin
Joined : 2007-02-08
Post Count : 5127
Merit : 10

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyThu Feb 08, 2007 11:48 pm

NICE very very NICE
Back to top Go down
http://www.rivperformance.com
AA
Administrator
AA


Name : Aaron
Age : 46
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18448
Merit : 252

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyThu Feb 08, 2007 11:49 pm

quote: "kinda like tide detergent."

Lol, maybe it'll glow in the dark.

Sweet pics. When I blow my motor, I want to do what you're doing. Series III engine, rockers, headers, IC = one mean machine.

Keep us posted!

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
urbsnspices
Fanatic
urbsnspices


Location : CHICAGO, US of MFn America
Joined : 2007-02-08
Post Count : 336
Merit : 4

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: picaroos   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyFri Feb 09, 2007 12:02 am

Modding beer, superbowl coors, damn you bears
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010187ff1.th

Parts table gettin filled up
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010182mx5.th

After cleaning the ole HG off
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010184cj8.th

Gasket cleaned off. Very tempted to clean up the casting, but that would really slow things down.
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010185mo2.th
Back to top Go down
nothincame2mind
Aficionado



Name : Ryan
Age : 38
Location : Columbia, Missouri
Joined : 2007-01-19
Post Count : 1182
Merit : 20

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyFri Feb 09, 2007 3:45 am

Pretty. I need to give some people some money so I can get mine back. It's pretty much almost done. All they gotta do is put the engine in and get money from me.
Back to top Go down
Mr.Riviera
Expert
Mr.Riviera


Name : Matthew
Age : 37
Location : Florida
Joined : 2007-01-17
Post Count : 4394
Merit : 101

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyFri Feb 09, 2007 3:37 pm

im going to put a moded L32 in mine when my L67 dies and cant be repaired...but hopefuly that will be a long ways doen the road.
how much does a crate L32 cost?

_________________
1996 with 254k miles, L32 4" FWI -> ported N* -> Ported Gen V w/3.0" Pulley, Stage 3 Phenolic I/C, ZZP FMHE, 1.84 RR, Headers and 3" pipe to mufflers, F-body brakes, and lowered on Eibachs. -RIP
AMG C400 White on black. Stage 2 w/E30 - 11.9@117 -daily
Write-Up: L32 (Series III SC) Install/swap, the saga continues Dsc_0110
Back to top Go down
pwmin
Enthusiast
pwmin


Name : Paul
Age : 43
Location : Denver, CO
Joined : 2007-01-23
Post Count : 131
Merit : 6

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyFri Feb 09, 2007 4:35 pm

kick-asswhats this going in exactly? for my original plans, i was going to look for a 98 park avenue L36 and do an L32 top end swap and cam, etc., but looks like my plans have changed. ed morad charges something like 1900 for L32's w/ appx. 30K.
Back to top Go down
urbsnspices
Fanatic
urbsnspices


Location : CHICAGO, US of MFn America
Joined : 2007-02-08
Post Count : 336
Merit : 4

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptySun Feb 11, 2007 8:02 pm

Found this baby on ebay for cheap. :face: After selling the ignition parts, exhaust manifolds, and fueling parts this L32 was about what Ed charges for a low miles L32. Anyway long story short, great engine dealer on ebay: engines direct. I was originally going to just get a low miles L67 but this was too good a deal to pass up.

The engine is getting an XP cam with all the typical supporting mods: springs, spring retainters, timing chain. Other fun mods include tog headers, custom borla exhaust, FWI, pulley system, custom tune.

Oh yeah, light home porting on the heads. beer Couldnt resist.
Back to top Go down
deekster_caddy
Master



Name : Derek
Age : 52
Location : Reading, MA
Joined : 2007-01-31
Post Count : 7717
Merit : 109

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptySun Feb 11, 2007 9:39 pm

Nice! What are you doing to the tranny? That's the only thing holding me back from headers and a cam...
Back to top Go down
nothincame2mind
Aficionado



Name : Ryan
Age : 38
Location : Columbia, Missouri
Joined : 2007-01-19
Post Count : 1182
Merit : 20

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyMon Feb 12, 2007 12:57 am

Quote :

The engine is getting an XP cam with all the typical supporting mods: springs, spring retainters, timing chain. Other fun mods include tog headers, custom borla exhaust, FWI, pulley system, custom tune.

Sounds like we're pretty much going for the same thing. I went with a smaller cam however. After I get it back and check KR, if it's low enough I'm going to drop to a 3.2 pulley. I'm also getting 42.5# injectors. I also had forged Diamond pistons installed.

Good luck with everything.
Back to top Go down
urbsnspices
Fanatic
urbsnspices


Location : CHICAGO, US of MFn America
Joined : 2007-02-08
Post Count : 336
Merit : 4

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyMon Feb 12, 2007 8:44 am

deekster_caddy wrote:
Nice! What are you doing to the tranny? That's the only thing holding me back from headers and a cam...

It is stock. I just want the car running again, and hopefully the tranny lasts long enough to have some fun. I just want 2 good summers of cruising/racing.

I am less worried about tranny abuse and more worried about installing this engine. I really hope I dont fork this up. neutral I have never done anything quite like this, so I am going slow.

I am polishing the combustion chambers and very lightly cleaning up the heads. I dont have the skill or patience to gasket match. I will post pictures tonight. I spent about 8 hours on one head and it just needs a final high polish on the combustion chamber. I will prolly only take it too a satin finish.
Back to top Go down
deekster_caddy
Master



Name : Derek
Age : 52
Location : Reading, MA
Joined : 2007-01-31
Post Count : 7717
Merit : 109

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyMon Feb 12, 2007 9:05 am

Don't worry too much about gasket matching anyway, unless you are building a top fuel engine. Sounds like a great project, I'm jealous!!! Congrats!

Now I just need a good excuse to 'blow' my engine so I can start the same project. Maybe something I can dump in my gas tank to make it smoke a lot so I can convince my wife I need a new motor smile
Back to top Go down
urbsnspices
Fanatic
urbsnspices


Location : CHICAGO, US of MFn America
Joined : 2007-02-08
Post Count : 336
Merit : 4

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyMon Feb 12, 2007 7:51 pm

Its pretty hard to take pictures of shiny things. As homer would say, "This will take all my skill...."

Before and after shot
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010188nu9.th

8)
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010189la2.th

Close up, satin finish, and the original rough sand casting
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010191kq8.th



Here was the ported head that I had on previously. You can see that they are pretty smooth. These were originally on the machinists car before I bought them. They also have a ceramic coating so they are pretty smooth. These were ported to an extreme and eventually cracked.
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010196tw5.th
Back to top Go down
urbsnspices
Fanatic
urbsnspices


Location : CHICAGO, US of MFn America
Joined : 2007-02-08
Post Count : 336
Merit : 4

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyFri Mar 02, 2007 5:05 pm

Putting the heads back together:
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010213bu0.th

Stock valves, 105lb valvesprings, Manly retainters and smaller valve seals for extra clearance, stock keepers. The stock valves are not as pretty as a polished after market set.

Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010214xz9.th

This is my crappy spring compressor. This was the only type the local stores had for a reasonable price. This type blows. :roll:
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010215au7.th
Here is the mark on the celing when this stupid compressor slipped off the spring: laughat
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010220ha0.th


Finished head. I was a little genrous with the assembly lube. Good shot of the mild polishing on the intake runners.
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010217bp1.th

Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010216zs0.th
Back to top Go down
Jason
Aficionado
Jason


Name : Jason
Age : 40
Location : Comox, BC, Canada
Joined : 2007-01-23
Post Count : 1378
Merit : 65

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyFri Mar 02, 2007 6:12 pm

Good work. If I ever install a cam again, I'm pulling the engine.
Back to top Go down
http://www.cardomain.com/id/Doctor_Meltdown
urbsnspices
Fanatic
urbsnspices


Location : CHICAGO, US of MFn America
Joined : 2007-02-08
Post Count : 336
Merit : 4

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyFri Mar 02, 2007 8:58 pm

You have a Turbo Regal? Awesome, has to be greatest sleeper of all time. I have spent a lot of time over on turbobuick.com. Even brought the Riv to the nats in bowling green a few years ago. My friend was in the stands for the bracket racing and overheard a old guy say, " I wonder if that guys dad knows what he is doing with the Buick?"
Back to top Go down
98riv
Moderator



Location : USA
Joined : 2007-01-14
Post Count : 995
Merit : 30

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyFri Mar 02, 2007 9:36 pm

Nice work. I hope you take some videos of it once you get it up and running.
Back to top Go down
BigTexKahuna
Rookie



Name : David
Location : Honolulu
Joined : 2007-02-23
Post Count : 15
Merit : 0

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptySat Mar 10, 2007 2:02 am

Wow... I'm almost aroused looking at those motor pics... Back in Texas... I'm talking waaayyy back in the '70s, me and my buds usta fool around with motors... V-8's... big-blocks were lotsa fun... Nowadays I live in Hawaii... one of those shoe boxes high in the sky (aka... condo...), so I no longer have the 'ol garage to play around with my toys... I'm jealous!!!
Back to top Go down
urbsnspices
Fanatic
urbsnspices


Location : CHICAGO, US of MFn America
Joined : 2007-02-08
Post Count : 336
Merit : 4

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyMon Mar 12, 2007 8:40 am

BigTexKahuna wrote:
Wow... I'm almost aroused looking at those motor pics... Back in Texas... I'm talking waaayyy back in the '70s, me and my buds usta fool around with motors... V-8's... big-blocks were lotsa fun... !!!

I have to tell you, working on a new-new-new engine is like nothing else. There is no gunk, no dirty oil, no random leaf that got into the engine bay 6 years ago. I have never done anything like this, so it is all new to me. My big worries are, getting the engine back in, and every damn plug hooked back up. Then, actually getting it to fire up and last more then 2k. tongue

When I look through a summit/jegs catalog it makes me wish I had an old GM car. Off the shelf race built engines which have 20 years of testing behind them. Just spend the cash and slap it in. bonk


Update: Waiting two weeks for a headgasket from ZZP so I can put the engine back together. headbutt WTF. Might try to cancel my order, this is getting silly.
Back to top Go down
oldsman105
Junkie
oldsman105


Name : Enrique Patino
Age : 38
Location : Queens, New York City
Joined : 2007-01-24
Post Count : 756
Merit : 10

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyMon Mar 12, 2007 9:35 am

2 weeks? Are you using stock thickness ?
Back to top Go down
urbsnspices
Fanatic
urbsnspices


Location : CHICAGO, US of MFn America
Joined : 2007-02-08
Post Count : 336
Merit : 4

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyMon Mar 12, 2007 11:39 am

oldsman105 wrote:
2 weeks? Are you using stock thickness ?

I ordered the .052s which are one size thinner then stock. It has to be the most common HG that is purchased, prolly more common then the stock thickness.

Everyone says how great ZZP is. The only reason I put the order in there is because of the Paypay offer where you get 15 bucks off your order. Guess what, no discount and no parts. Now you got me all reved up, I am killing this order! headshot


UPDATE:

Rebuilt the other head. Got some nice macro shots of the polish and mild gasket matching. Every one loves car part pics, I know I do.

Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010194sr2.th

Not really a port job, just a gasket match, and a mild one at that:
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010192af2.th

Note the cool aluminum gaskets. These seem to be so much better then the plastic ones.

Ever notice how everything looks worse in an extreme close up. pig Also the flash really picks up surface roughness. Oh well.
Write-Up: L32 (Series III SC) Install/swap, the saga continues P1010190td7.th
Back to top Go down
urbsnspices
Fanatic
urbsnspices


Location : CHICAGO, US of MFn America
Joined : 2007-02-08
Post Count : 336
Merit : 4

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyThu Mar 22, 2007 7:39 am

Things seem to be shifting alittle, pricewise. ZZP used to match or undercut on price. Now other vendors are turning up with better deals. Wbodystore.com also has some pretty good pricing.

Installing the MLS headgaskets tonight. I wish I would have gotten some pics of the timing chain install.
Back to top Go down
AA
Administrator
AA


Name : Aaron
Age : 46
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18448
Merit : 252

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyThu Mar 22, 2007 8:28 am

quote: "I wish I would have gotten some pics of the timing chain install."

I was going to ask you about that. I plan to do a Rollmaster this year. How hard are they to do?

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
urbsnspices
Fanatic
urbsnspices


Location : CHICAGO, US of MFn America
Joined : 2007-02-08
Post Count : 336
Merit : 4

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyThu Mar 22, 2007 9:51 am

AA wrote:
quote: "I wish I would have gotten some pics of the timing chain install."

I was going to ask you about that. I plan to do a Rollmaster this year. How hard are they to do?

I went with the JP single timing set from intense. At 80 bucks it is not much at all for a little insurance. With Rollmaster and JP in the market, the prices have come down a ton. Many people are going double chains to eliminate the tensioner. Sounds like a great plan, but I really dont think it is needed. I just wanted something stronger then stock and the single chain is something like 10+ times stronger.


With the engine out of the car it was a piece of cake. The JP sprocket is a very high tolerance fit, tighter then the stock sprocket. I used the old sprocket and tapped the new one home with a hammer. You have to get the keyway lined up perfectly because there will be no spining it once it is on the crank. The hardest part with the engine in the car will be removing the cover and lining up the new sprocket. You will have to remove the side engine mount, but I dont think you will have to lower it much.

Batteries were dead in my camera, or else I would have some nice pics of the process.
Back to top Go down
AA
Administrator
AA


Name : Aaron
Age : 46
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18448
Merit : 252

Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues EmptyThu Mar 22, 2007 10:06 am

Thanks. I'll be consulting with you when I tackle this project. I wonder why INTENSE stopped selling the Rollmaster single chain?

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
Sponsored content





Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty
PostSubject: Re: Write-Up: L32 (Series III SC) Install/swap, the saga continues   Write-Up: L32 (Series III SC) Install/swap, the saga continues Empty

Back to top Go down
 
Write-Up: L32 (Series III SC) Install/swap, the saga continues
Back to top 
Page 1 of 4Go to page : 1, 2, 3, 4  Next
 Similar topics
-
» Write-Up: How to install an aftermarket SC pulley (Series I)
» Write-Up: XP Cam & Valvetrain Install
» Write-Up: 4T80e Transmission Install
» Write-Up: How to Remove/Install SC Pulley
» FAQ: Series I to Series II / Series III Engine Swap

Permissions in this forum:You cannot reply to topics in this forum
Riv Performance ::   Supercharged 3800 Tech :: Series II Engine & Transmission-
Jump to: