Memory Seat & Mirrors - A Question plus Keyfob Sync Info

1. I have a wide-open question for everyone: Does anybody have a car that stores the recliner position in the memory module? I think this is another case of the shop manuals having mistakes that you wouldn't expect (or hope for) from the factory, but some sections of my e-manual refer to the recliner running through the MSM Module...

2. While I was researching this topic, I found some people wanting to know how to set different keyfobs to trigger different seat/mirror positions when the car is unlocked:

Program a keyless entry transmitter for a specific mode as follows:

* Mode 0: Press the SET MEMORY button on the left seat switch and then, within 5 seconds, press the UNLOCK button on the keyless entry transmitter.
* Mode 1: Perform a memory set function for DRIVER-1 and then, within 5 seconds, press the UNLOCK button on the keyless entry transmitter.
* Mode 2: Perform a memory set function for DRIVER-2 and then, within 5 seconds, press the UNLOCK button on the keyless entry transmitter.
* Mode 3: There are 2 different ways to set the keyless entry transmitter to this mode:
o Perform an easy exit function and then, within 5 seconds, press the UNLOCK button on the keyless entry transmitter.
o Press the UNLOCK button on the keyless entry transmitter and then, within 5 seconds, perform an easy exit function.

I'm pretty sure the recliner position is not supposed to change, just the seat position.

Thanks, Derek.

Thanks Mark,
this is some good info on seat memory, I printed it and its in my glovebox for future reference.