Riv Performance
Would you like to react to this message? Create an account in a few clicks or log in to continue.

The 8th Gen Riviera Resource
 
HomeDashboardLatest imagesSearchRiviera Questions & AnswersWrite-Ups IndexRegisterRelated LinksLog in

 

 FAQ: How to tune the PCM? (Series II SC)

Go down 
+31
gojo83
A_W_O_L
th3fr4nchi5e
matt270avian
charlieRobinson
highwaywarrior
97SC_CALI_RIV
nebstewart07
Abaddon
riv96
rivman96
esquire23
LARRY70GS
97 park ave
BMD
sdconcepts
1998 Riv
L67
Rickw
#1BearsFan
BillBoost37
turtleman
okiedrifter
NO 4 EVR
deekster_caddy
oldsman105
T Riley
pwmin
98riv
Mr.Riviera
AA
35 posters
Go to page : 1, 2, 3 ... 9, 10, 11  Next
AuthorMessage
AA
Administrator
AA


Name : Aaron
Age : 47
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18452
Merit : 252

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptyMon Jan 15, 2007 9:15 pm

Basically, we have three choices when it comes to tuning our powertrain control modules:

1) Replace the PCM with an aftermarket version tuned to your specifications.
2) Re-write the PCM's code yourself.
3) "Trick" the PCM by using an AFC (Air/Fuel Calibrator).

1) There are companies (INTENSE, ZZP, DHP) who sell PCMs with generic performance tunes at fairly low cost. Most if not all of these won't work for the Riviera, which has its own code (BIN). For a price, these companies can custom burn a PCM that will work, but unless you know exactly what you need, this option probably isn't the best. Even the programmers will tell you that a dyno tune is recommended. This requires bringing your car in to run on a dynamometer, incurring additional costs. Obviously, this option is a 'set-it-and-forget-it' requiring the least know-how on your part, and you don't need to own any software or hardware, as the tuning service provides this. But keep in mind, if you make additional modifications, you need to go through the process all over again. If you like to tweak & tune, this can get expensive. Also, you are limited to where & when you can make a change, as visits must be scheduled with the shop.

2) Using a PCM programmer such as DHP's PowrTuner software (discontinued, orig price $390) or HPTuners ($500) to write your own PCM code is probably the best option if you really want to do it right. With these softwares, you can tweak everything from fuel curves, transmission shift behavior, to the speed governor and RPM limiters, and more. It's the ultimate mod for someone who really wants to customize their Riv's driveability. Here are some advantages:

• You can also get a pretty decent street tune without needing to pay for time on the dyno, just by doing some careful scanning, logging data and tracking results. Or, you can dyno tune just like the pros, except you or a programmer of choice can make the needed changes. You pay only for the dyno runs, and we have members who may be able to help you or tune for a reasonable fee.

• One big advantage of tuning yourself is being able to plug in and flash the PCM any time you want to. Didn't get it perfect the first time? Make a slight adjustment and try again, at no additional cost. New SC pulley to swap? You can scan & tune in your own driveway.

• An often overlooked advantage with using a tuner is the fact you don't actually need to remove your existing PCM unit to modify it - it's all done by plugging in. This means you don't have to purchase a 2nd physical unit - a back-up of your original BIN can be stored electronically, and uploaded back to your unit at any time.

Doing your own tuning can be a daunting task for many, as the learning curve is steep. This is where our tuning forums can help with any questions you might have. As mentioned, we have members willing to help you with questions, or even write/program tunes that will work for your car. You also must have some kind of computer, preferably a laptop, to run the software. You may also want a separate scanning package, especially with the DHP (DHP's scanner isn't the best). Check the Scans, Tuning, & PCMs section for more specific topics.

3) The AFC, more specifically the Tech Edge Mini AFC 2.2, is a small box that gets wired between your MAF (mass air flow) sensor and the PCM. This used to be the only way to tune the air/fuel curve for Rivieras. Sometimes referred to as a MAF translator, the AFC lets you to "fool" your PCM into adding or subtracting fuel from the air/fuel mix by altering the MAF signal in a very controlled manner. It allows you to in effect reprogram the PCM's MAFF (mass air flow frequency) table to get the fueling curve your engine needs to run with less KR. Usually this means adding fuel to keep up with all of the extra incoming air. The expected result is that knock will be eliminated and KR will go down, giving you back lost horsepower and enabling your engine to run more safely.

The AFC has been used with varying degrees of success. A major advantage with the AFC is the PCM always stays stock, so removing the AFC removes any 'programming'. It is a low cost option at a little over $100, and no software or computer is required to use. You can even 'dyno tune' with the AFC, in theory. However, the AFC can only adjust air/fuel, offering no transmission control or other tuning perks. For basic adjustments to the fueling curve, the AFC makes sense; for more in depth installations, reprogramming the PCM with a tuner is probably the best way to go. For info on how to tune with the AFC, check the Scans, Tuning, & PCMs section.


Last edited by AA on Fri May 27, 2011 11:21 am; edited 2 times in total
Back to top Go down
http://www.cardomain.com/ride/657082/4
Mr.Riviera
Expert
Mr.Riviera


Name : Matthew
Age : 38
Location : Florida
Joined : 2007-01-17
Post Count : 4394
Merit : 101

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptyWed Jan 17, 2007 11:57 pm

what would it take to completly replace our PCM and wires from ,say a GTP? i see rivman had that done on his 95' (the one with the swap'd engine) and i was wondering what something like that may cost and if its easier/cheaper that a DHP PT? what all would need to be replaced?

_________________
1996 with 254k miles, L32 4" FWI -> ported N* -> Ported Gen V w/3.0" Pulley, Stage 3 Phenolic I/C, ZZP FMHE, 1.84 RR, Headers and 3" pipe to mufflers, F-body brakes, and lowered on Eibachs. -RIP
AMG C400 White on black. Stage 2 w/E30 - 11.9@117 -daily
FAQ: How to tune the PCM? (Series II SC) Dsc_0110
Back to top Go down
AA
Administrator
AA


Name : Aaron
Age : 47
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18452
Merit : 252

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptyThu Jan 18, 2007 8:31 am

Not sure that it would be difficult, but buying a separate PCM isn't cheap. I think they're at least as much as the PowrTuner, maybe less at a salvage yard. I do know that with a PowrTuner you can effectively change all of the transmission settings to that of a GTP. From what I know that's the biggest percievable difference between the cars.

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
98riv
Moderator



Location : USA
Joined : 2007-01-14
Post Count : 995
Merit : 30

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptyThu Jan 18, 2007 10:06 am

I believe you would have trouble with the security system. It wouldn't be worth the trouble.
Back to top Go down
Mr.Riviera
Expert
Mr.Riviera


Name : Matthew
Age : 38
Location : Florida
Joined : 2007-01-17
Post Count : 4394
Merit : 101

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptyThu Jan 18, 2007 11:13 am

i would probably need a tuner or tech 2 just to make it work. thanks for the info, im just trying to research all the options and ideas.

_________________
1996 with 254k miles, L32 4" FWI -> ported N* -> Ported Gen V w/3.0" Pulley, Stage 3 Phenolic I/C, ZZP FMHE, 1.84 RR, Headers and 3" pipe to mufflers, F-body brakes, and lowered on Eibachs. -RIP
AMG C400 White on black. Stage 2 w/E30 - 11.9@117 -daily
FAQ: How to tune the PCM? (Series II SC) Dsc_0110
Back to top Go down
pwmin
Enthusiast
pwmin


Name : Paul
Age : 43
Location : Denver, CO
Joined : 2007-01-23
Post Count : 131
Merit : 6

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptyThu Jan 25, 2007 10:17 am

get a powrtuner. its the best mod i've ever bought.

fyi, you can find used ones on clubgp.com. with the new software updates, the powrtuner is open to all 98-02 3800's, so if its set up for a gtp, it doesnt matter, as long as your riv is a 98 or 99.

is see yours is a 96. if you get a used one, make sure you're getting a good deal, because it costs $100 to add another vehicle (at least it used to, i'd check dhp)

oh, yeah, also fyi: i got a gtp pcm from a friend and swapped it into my riviera just for the hell of it before dhp opened up the powrtuner, and it did the typical thing where it would start but die immediately. i even flashed it to a regal gs, since that was the second vehicle on my powrtuner, and that didnt work. the regals use class II data for the gauges, so a wiring harness from them wouldnt work.
Back to top Go down
T Riley
Guru
T Riley


Name : Travis
Age : 34
Location : Minnesconsin
Joined : 2007-02-08
Post Count : 5127
Merit : 10

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: FAQ: Newbie Scan/Tune Questions   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 11:46 am

i really want to hook up something to my laptop so i can tune my car whenever so if i see a race i can quick change it to race mode and hold the rpm's highrer
Back to top Go down
http://www.rivperformance.com
AA
Administrator
AA


Name : Aaron
Age : 47
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18452
Merit : 252

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 11:54 am

I used AutoTap. Tuning doesn't really work that way, though. Rewriting the PCM takes a couple mins, and you must have the car off. What you can do is tune the PCM so it drives/shifts differently when at WOT vs. normal. Once you see how much better the car drives with a tune, you won't want to use the factory settings ever.

Until you get a tuner, one way I used to hold the RPMs higher is to manually shift.

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
T Riley
Guru
T Riley


Name : Travis
Age : 34
Location : Minnesconsin
Joined : 2007-02-08
Post Count : 5127
Merit : 10

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 11:58 am

AA wrote:
I used AutoTap. Tuning doesn't really work that way, though. Rewriting the PCM takes a couple mins, and you must have the car off. What you can do is tune the PCM so it drives/shifts differently when at WOT vs. normal. Once you see how much better the car drives with a tune, you won't want to use the factory settings ever.

Until you get a tuner, one way I used to hold the RPMs higher is to manually shift.
what i found out is that when i hold it in first geat it shifts at 48 and when its in Overdrive its at 45 LOL but yes ill go and find more about auto tap is it easy to use
Back to top Go down
http://www.rivperformance.com
AA
Administrator
AA


Name : Aaron
Age : 47
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18452
Merit : 252

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 12:04 pm

I was able to hold mine to 99 mph in 2nd gear by manually shifting (this was after a few mods, be careful).

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
T Riley
Guru
T Riley


Name : Travis
Age : 34
Location : Minnesconsin
Joined : 2007-02-08
Post Count : 5127
Merit : 10

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 12:08 pm

yes my car is still goverened at 108 mph tho lol shhh i didnt test it haha jk i cant remember what gear i was in !!!! but it still shifts on its own !!! at 48 for me so i cant find much about tuners u kno my car and what will be done to it and im on a very low budget waht would u sugest for a tuner taht WILL work haha unlike my dads..
Back to top Go down
http://www.rivperformance.com
AA
Administrator
AA


Name : Aaron
Age : 47
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18452
Merit : 252

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 12:14 pm

PowrTuner is $380. It's not cheap, but it's worth it.

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
T Riley
Guru
T Riley


Name : Travis
Age : 34
Location : Minnesconsin
Joined : 2007-02-08
Post Count : 5127
Merit : 10

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 12:16 pm

AA wrote:
PowrTuner is $380. It's not cheap, but it's worth it.

would i definitely need a powrtuner if i get the 3.4 inch pulley and if i get the tuner will i be able to go to 3.25 without knock
Back to top Go down
http://www.rivperformance.com
oldsman105
Junkie
oldsman105


Name : Enrique Patino
Age : 39
Location : Queens, New York City
Joined : 2007-01-24
Post Count : 756
Merit : 10

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 1:50 pm

98riviera98 wrote:
AA wrote:
PowrTuner is $380. It's not cheap, but it's worth it.

would i definitely need a powrtuner if i get the 3.4 inch pulley and if i get the tuner will i be able to go to 3.25 without knock

you will boost stack. You need to to be able to get the air out of the engine as well as it comes in. Headers and rockers do wonders.
Back to top Go down
T Riley
Guru
T Riley


Name : Travis
Age : 34
Location : Minnesconsin
Joined : 2007-02-08
Post Count : 5127
Merit : 10

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 1:55 pm

oldsman105 wrote:
98riviera98 wrote:
AA wrote:
PowrTuner is $380. It's not cheap, but it's worth it.

would i definitely need a powrtuner if i get the 3.4 inch pulley and if i get the tuner will i be able to go to 3.25 without knock

you will boost stack. You need to to be able to get the air out of the engine as well as it comes in. Headers and rockers do wonders.
so will i be fine with the 3.4 inch pulley and air intake and pretty open exhaust i have no mufflers........ or would i need headers (idk bout putting on roller rockers uhhh sounds like alot of works because u need a air tank and twist ties@!!!!!!! according to AAs install!!! hahah Jk but is roller rockers and headers woow thats alot of $$$$
Back to top Go down
http://www.rivperformance.com
AA
Administrator
AA


Name : Aaron
Age : 47
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18452
Merit : 252

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 2:23 pm

Agree with oldsman, you can program enough fuel with a tuner to run the 3.4", but a 3.25" needs additional mods to help flow. What he's calling "boost stacking" is what happens when you try to cram too much air into the engine with no way to push it out.

It's a lot of money, but compared to what you'd spend to get the same numbers out of a N/A engine, it's a bargain. Modding cars to be fast is expensive, period. We make up for the cost in already having a supercharger, and the fact that it's a Buick let's you save on insurance.

Btw, if you drop a valve while installing valve springs, you'll wish you'd bought a $20 air tank! If you think modding is expensive... try paying someone $1000+ to pull the heads and retrieve a dropped valve!

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
deekster_caddy
Master



Name : Derek
Age : 52
Location : Reading, MA
Joined : 2007-01-31
Post Count : 7717
Merit : 109

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 9:50 pm

If you don't have a tuner, you need to make some other supporting mods to run a 3.4 safely. I'd recommend an MPS starting with a 3.5.

I picked up a DHP PowerTunr a few months ago. Personally, I wish I'd skip DHP's PowerTuner and spend an extra $100 for an HP Tuners setup. If you think you might be interested in tuning, save up $500, skip the $300 Autotap and go straight to an HP Tuner.
Back to top Go down
AA
Administrator
AA


Name : Aaron
Age : 47
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18452
Merit : 252

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 11, 2007 11:40 pm

Why is HP Tuner better than DHP?

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
deekster_caddy
Master



Name : Derek
Age : 52
Location : Reading, MA
Joined : 2007-01-31
Post Count : 7717
Merit : 109

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptyMon Feb 12, 2007 8:50 am

I don't care for HPT's pricing/car structure, but their software is just... better. I can't stand the UI of DHP's, it is sooo poorly designed. I don't think it's designed at all, it just kind of happened. It's a terrible scanner, I wish I still had my autotap. I could go off for hours about the things that irritate me about it but it's not really for this board.

My experience with HPT is from others locally who use it, and I'm just jealous every time I see theirs. It's obviously worth the extra dough.

All my opinions, and to some that stuff doesn't matter, but I can't stand the temperatures being recorded in METRIC ONLY, drives me up a friggin WALL, and that's just the start...
Back to top Go down
AA
Administrator
AA


Name : Aaron
Age : 47
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18452
Merit : 252

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptyMon Feb 12, 2007 9:21 am

I also can't stand the DHP's scanner. I use AutoTap to scan, only tune with DHP. Maybe that's why I can put up with the PowrTuner's UI.

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
T Riley
Guru
T Riley


Name : Travis
Age : 34
Location : Minnesconsin
Joined : 2007-02-08
Post Count : 5127
Merit : 10

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptyMon Feb 12, 2007 10:12 am

so what if i get one of those reprogrammed PCM's off of 3800performance.com will it work with my car if i get the 1998 buick regal GS one???? its 100$$ for it !!!
Back to top Go down
http://www.rivperformance.com
AA
Administrator
AA


Name : Aaron
Age : 47
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18452
Merit : 252

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptyMon Feb 12, 2007 10:15 am

Nope, must have one custom tuned for the Riv. You're looking at probably $200. DHP may offer a better deal, as they already have a performance version of the Riv's BIN for PowrTuner users. You'd need to ask them or a seller of DHP products. W Body store would be a good place to start. Mike's very good to work with.

Fyi, I have the generic DHP BIN, and wasn't impressed. I wouldn't pay $100 for it. Only reason I use it is because the PowrTuner lets me change anything I want.

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
deekster_caddy
Master



Name : Derek
Age : 52
Location : Reading, MA
Joined : 2007-01-31
Post Count : 7717
Merit : 109

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 18, 2007 10:44 pm

No, a regal PCM won't work in the Riv. You can get a Riviera PCM from a few vendors, DHP and Intense being two I am familiar with. I started with the Intense PCM and really really liked their changes from stock. However, that still isn't tuning. They come with changes so your fans work right with a 180 tstat, and they do change a few things like shift points, shifting pressure (crisper shifts), etc. You can choose a stock timing table or something more agressive. If you have a lot of KR do NOT choose a more agressive timing table, KR will only get worse. I don't know what they do to the fuel tables, but the things I really noticed had more to do with the transmission.
Back to top Go down
Mr.Riviera
Expert
Mr.Riviera


Name : Matthew
Age : 38
Location : Florida
Joined : 2007-01-17
Post Count : 4394
Merit : 101

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptySun Feb 18, 2007 11:38 pm

thats only for the 97+ rivs right?

_________________
1996 with 254k miles, L32 4" FWI -> ported N* -> Ported Gen V w/3.0" Pulley, Stage 3 Phenolic I/C, ZZP FMHE, 1.84 RR, Headers and 3" pipe to mufflers, F-body brakes, and lowered on Eibachs. -RIP
AMG C400 White on black. Stage 2 w/E30 - 11.9@117 -daily
FAQ: How to tune the PCM? (Series II SC) Dsc_0110
Back to top Go down
AA
Administrator
AA


Name : Aaron
Age : 47
Location : C-bus, Ohio
Joined : 2007-01-13
Post Count : 18452
Merit : 252

FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) EmptyMon Feb 19, 2007 8:42 am

One of the biggest complaints of INTENSE PCMs is the advanced timing causing KR.

'96s would be different, but I don't see why they couldn't do it. Someone needs to ask DHP to make one (maybe they already have).

_________________
'05 GTO 6.0L • 6-spd • 95k miles • 0-60: 4.8s • 16.9 avg MPG • Nelson Ledges Lap: 1:26

'95 Celica GT 2.2L • 5-spd • 165k miles • 0-60: yes

'98 SC Riviera • 281k miles • 298 HP/370 TQ • 0-60: 5.79s • ET: 13.97 @ 99.28 • 4087 lb • 20.1 avg MPG • Nelson Ledges Lap: 1:30
3.4" pulley • AL104 plugs • 180º t-stat • FWI w/K&N • 1.9:1 rockers • OR pushrods • LS6 valve springs • SLP headers • ZZP fuel rails
KYB GR2 struts • MaxAir shocks • Addco sway bars • UMI bushings • GM STB • Enkei 18" EV5s w/ Dunlop DZ101s • F-body calipers
EBC bluestuff/Hawk HP plus • SS lines • Brembo slotted discs • DHP tuned • Aeroforce • Hidden Hitch

^^^ SOLD ^^^ frown

'70 Ninety-Eight Holiday Coupe 455cid • 116k miles
^^^ SOLD ^^^ frown
Back to top Go down
http://www.cardomain.com/ride/657082/4
Sponsored content





FAQ: How to tune the PCM? (Series II SC) Empty
PostSubject: Re: FAQ: How to tune the PCM? (Series II SC)   FAQ: How to tune the PCM? (Series II SC) Empty

Back to top Go down
 
FAQ: How to tune the PCM? (Series II SC)
Back to top 
Page 1 of 11Go to page : 1, 2, 3 ... 9, 10, 11  Next
 Similar topics
-
» FAQ: Series I to Series II / Series III Engine Swap
» 95 Series I with Series II parts from factory, any external indicators?
» 1995 prototype riv swap series 1- series II
» Series II Transmission + Series I Engine?
» Starter problem?

Permissions in this forum:You cannot reply to topics in this forum
Riv Performance ::   Supercharged 3800 Tech :: Series II Scans, Tuning, PCM-
Jump to: